Generating a Sine Wave Using the Hardware and Software Tools of
TMS320C6713B
Aim of the Experiment :
The aim of this experiment is to familiarize you to use the hardware and
software tools of TMS320C6713B. These tools will be explored by generating a sine
wave using three different methods
- Using Polling
- Using Interrupts
- Using DMA
Equipment to be checked out :
- Two BNC - stereo pin (DSP)cables
All the above equipment can be
checked out from the checkout in the second floor. The above list of equipment
is the equipment required per work station.
Deviations from the laboratory manual :
- Polling
- Care should be taken that the sine wave samples that are generated are
by the sin() function are properly converted into 16-bit integers so
that the AIC recognizes it as data. (it's pretty easy)
- To measure the frequency of the sine wave generated use the
oscilloscope. The other method using the signal generator can be ignored.
- Using Interrupts
Follow the manual
Recitation
Slides for Laboratory 2
Assignment
Submitting this assignment is optional, but doing it would be
useful with your QUIZ preparations
Assignment
Back to the
course home page
Next
Experiment
Previous
Experiment